The FlashFish 200W Portable Power Station is a small and handy power source for camping, travel, home backup, and road trips. With 151Wh of power and a lightweight body, it’s easy to carry in a backpack or car. You get AC, DC, and USB ports to charge phones, tablets, laptops, fans, lights, drones, cameras, and even CPAP machines.
The soft handle and compact size make it simple to bring anywhere. The clear LCD screen shows battery level, charging status, and output mode so you always know how much power you have left.
✅ 151Wh (40800mAh) Capacity — Enough for phones, lights, small tools, and short CPAP sessions.
✅ 200W AC Output — Safe pure power for many small devices.
✅ DC Outputs — Good for efficient charging and longer run times.
✅ USB Ports, Including QC3.0 — Fast phone and tablet charging.
✅ Lightweight Design — Only 4.07 lbs; easy to pack and carry.
✅ Smart LCD Screen — Shows remaining battery, charging, AC/DC status.
✅ Safe Power System — Protects from overcurrent, overvoltage, and heat.
✅ 1-Year Warranty — FlashFish provides 12 months of support.
This power station works well for tents, cabins, van camping, and backyard setups. It can run:
Smartphones & tablets
Laptops
Fans
LED lights
Cameras & drones
CPAP machines (DC recommended for longer runtime)
Car accessories
Use these simple formulas:
AC devices: 151Wh × 0.90 ÷ device watts
DC/USB devices: 151Wh × 0.95 ÷ device watts
Example: A 20W device runs about 6–7 hours.
You can run a CPAP machine in two ways:
110V AC plug, or
12V DC plug (recommended for longer run time)
Turn off the heater/humidifier to extend battery life.
Wall outlet
Car charger
15–24V solar panel (not included)
No memory effect — the battery stays strong over time.
AC/DC mode switch for simple use
Soft, easy-carry handle
Bright LCD screen for low-light camping
Lightweight and travel-friendly
200W AC output for basic electronics
DC & QC3.0 USB charging options
Solar-ready
Clear LCD display
Good for CPAP with DC setup
Not for devices over 200W
Solar panel not included
Limited capacity for large appliances
Capacity: 151Wh (40800mAh)
AC Output: 110V, 200W max
DC Output: 2 ports (total 168W limit)
USB Ports: 2 × QC3.0, 1 × 2.4A auto
Weight: 4.07 lbs
Size: ~8.2 × 4.3 × 6.2 in
Recharge Options: Wall, car, solar (15–24V)
Battery Type: Lithium battery pack
Safety: Overcurrent, overvoltage, over-temperature protection
FlashFish EA200 Power Station
AC charger
Car charging cable
User manual
Embrace The Convenience Of Multiple Charging With FlashFish EA200 Portable power generation on-the-go!
Flashfish portable power station EA200 is designed for outdoor activities’ power supply. Small size (5.6lbs, 8.2x4.3x6.2 inch) with big capacity (150Wh), the most portable all-in-one power station can fulfill your demand for camping or emergency.
FAQ:
Q1: What devices can Flashfish EA200 power?
A: Please note that the AC output port can charge devices less than 200W, DC output can charge devices total less than 168W; Once exceeding, this portable power generator will be in protection mode. We need to charge it by wall charger to reset it.
Q2: How to calculate the working time for your devices?
A: 1. AC output working time=151wh * 0.9/the power of your device
For example, assume your power of device is 20W, working time will be 151wh * 0.9/20w=6.79 hrs ( rough calculated )
2. DC and USB output working time=151wh * 0.95/the power of your device
Q3: AC and DC output, which way is best to power my CPAP machine?
A: Yes, for Optimal Use with CPAP.Flashfish EA200 power station can power your cpap by two ways: 110V AC plug and 12V DC plug.Strongly recommend that CPAP users use DC to DC converter to work with this unit and turn off or remove the heater/ humidifier, it should last longer.To buy the DC converter, please consult with your CPAP supplier or simply find us for a guide.Same as others, like laptop, use DC output will be longer than AC output.




